Chinese Sunyo Wz30 -25 backhoe loader with Yuchai engine, Chinese axle and transmission.

SUNYO / Chinese High Quality/  WZ30-25 Backhoe Loader  with Famous Brand Engine and Transmission. Widely used, flexible operationThe Backhoe Loader WZ30-25:   WZ30-25 Backhoe loader, with YUCHAI  YC4A105Z-T20 engine , power is100hp, chinese axle and Trans. With A/C, pilot control, Rev

Featured Products

SUNYO / Chinese High Quality/  WZ30-25 Backhoe Loader  with Famous Brand Engine and Transmission. Widely used, flexible operation

Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.
The Backhoe Loader WZ30-25:

   WZ30-25 Backhoe loader, with YUCHAI  YC4A105Z-T20 engine , power is100hp, chinese axle and Trans. With A/C, pilot control, Reversing video, hammer pipe ,                                                                                                             WZ30-25 Backhoe loader Operating weight7600kg, front bucket 1.2 m3, rated loading is 2.5tons. Rear digging bucket is 0.3 m3,                                     
  It can  use for loading and digging, one machine has two functions. can help you to save much more cost. and can do many kinds work for building road, and so on.                                                                      
 It will bring you higher economic efficiency, Better profit income.


Main Performance Parameter of WZ30-25:
 
Overall Dimension 
1 Length X Width X Height                        5910X 2268 X 3760(mm)
2 Wheel base                                    2250(mm)
3 Rack                                       1640(mm)
4 Min. ground clearance                           300(mm)
Main Technical Specification 
1 System pressure                                       
  Load hydraulic system                           18Mpa
  Dig hydraulic system                              20Mpa
  Steering hydraulic system                         12Mpa
2 System flow                                   120L/min
3 Four-wheel drive                               whole hydraulic system
4 Total operating weight                           7600kg
5 Maximum speed                                22Km/h
6 Maximum gradient capacity                       30°
Front loader 
1 loading bucket capacity                          1.2m3
2 rated loading                                   2500KG
3 maximum articulated height of bucket               3400(mm)
4 bucket discharge height                           2795(mm)
5 bucket discharge distance                         1048(mm)
6 loading lift capacity                              25KN
7 bucket hydraulic translation function                 yes
8 bucket lift time                                  6.8s
9 bucket lower time                                2.5s
10 bucket discharge time                            1.2s
11 maximum tractive force                          39KN
12 maximum breakout force                         38KN
Rear digger.  
1 backacter bucket capacity                         0.3m3
2 backacter discharge height                        3878(mm)
3 maximum digging depth                          4080~4500(mm)
4 maximum digging radius                          5688(mm)
5 bucket slewing angle                             190°
6 bucket digging capacity                           46KN
7 bucket stick digging capacity                       31KN
Diesel engine 
1 model                                           YUCHAI  YC4A105Z-T20
2 type                                           turbocharging four-stroke
3 rated power                                    75KW/102HP
4 rated speed                        2400 r/min
4 cylinder -internal diameter                    4-105
5 maximum torque                              400N.M
6 minimum fuel consumption                     235 g/kw.h
7 displacement                               4.3L
Transmission system 
1 model of hydraulic pump                         fixed shaft power shift transmission
2 gear shift                                   2forward shift 2 reverse shift
3 torque                                        YJ-280
4 drive pump                                    CDXaf3016-IL
5 flow                                         16ml/r
6 work pump                                    CBGj2063
7 flow                                          63ml/r
Steering system 
1 type                                           articulated hydraulic steering
2 model of steering control valve                     BZZ5-250
3 model of turning control valve                      YSF25S-00
4 steering angle                                   left or right 36±1°
5 minimum turning radius                          5018(mm)
Axles 
1 main transmission type                           single reduction
2 wheel reduction type                             wheel reduction
Wheel 
1 tire size                                        16/70-20
2 front wheel pressure                              0.22Mpa
3 rear wheel pressure                               0.20Mpa
4 service braking                                  air over hydraulic disc on 4 wheels
5 parking brake                                   manual parking brake
Refill Capacity 
1 fuel tank                                       80L
2 transmission                                    25L
3 front axle                                      9KG 
4 rear axle                                       9KG
5 hydraulic tank                                   140L
 
Attachments:
Our backhoe loader can be with some more attachements excapt the standard bucket. for exmple the 4 in 1 bucket, Quick Change, Fork, Auger, Hamer, Grass Grab, Wooden Fork, Snow blade, sweaper, Rops And so on. 
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.Our Service :
Pre-sale service:
To our customers, before you buy the equipments, we hope to understand your needs, according to your machine requirements and your budget; choose the right model for you, to ensure that you buy high-quality products at a lower price.
At the same time, you are welcome to visit our factory in LINYI, China; we will book hotels, air tickets and take you up from air port.
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.
After-sale service:
After the sale, we will properly arrange the transportation of the machine to ensure that the goods are safely delivered to your hands.
At the same time, we will provide you with technical support 24 hours a day, or send engineers to guide the installation and operation. If there are any quality problems with the machine, we will solve it for you in the first time.


Factory View:

Here show some factory pictures to help you understand our company.
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.
Exhibition:
Here show you some exhibition pictures . 
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.Certificate :
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.
Packing & Shipping: 


We have been engaged in foreign trade for more than 18 years and have very rich experience in shipping. According to the past situation, each of our products is complete and delivered to customers as planned.
Generally, For the WZ30-25 Backhoe loader , one set need one 40H conainer, or two sets load into one 40H container and one 20 container.  it also can load in the bulk ship, or Ro-on/Ro-off ship. it according your requirements
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.
FAQ:
Q1: Which country do you export to?
Asia: Pakistan, Philippines, Thailand, Myanmar, Vietnam, Bangladesh, Kazakhstan, Turkmenistan, etc.
Middle East: Iran, UAE, Jordan, Oman, Saudi Arabia, Syria, etc.
Europe: Poland, Russia, Ukraine, Belarus, Bulgaria, etc.
Africa: South Africa,Kenya,Congo,Ethiopia,Nigeria,Ghana,Algeria,Senegal,Tunisia,etc.
South America: Paraguay, Colombia, Brazil, Peru, Chile, Cuba, Venezuela, etc.
Oceania: Australia, etc.

Q2: What is the proportion of your products export?
90% of our products are exported to all over the world.

Q3: What is the payment term?
We can discuss with you. Consider for long-term customers we are favorable payment terms TT, L/C, west union. It depends on the cooperation time, country and contract value.

Q4: What kind of logistic service do you supply?
FOB, CIF, C&F

Q5: What spare parts can you supply?
All kinds of spare parts of SUNYO JCM, SDLG, SHACMAN,  SHANTUI, YTO,  etc.
Chinese Sunyo Wz30-25 Backhoe Loader, with Yuchai Engine, Chinese Axle and Trans.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours